Bronze Non return - 2010/03/31 19:46
Hi,
I know the valve you refer to, i cut mine out of Maria, it didn't work either, I looked into replacing but decided to go full self-draining instead and raised the cockpit sole so I cut put a proper sea-cock below the waterline.
While I cut the old copper pipe out of the transom I was amazed how loose it was, the fiberglass which kept this pipe in just came away from the pipe after a couple of taps with the hammer, i'm glad that didn't happen at sea.
Anyway, should you wish to replace the valve (which i don't recommend) you can buy them from here
http://www.johnsonvalves.co.uk/non%20return.htm
Any more questions just ask.
Good look
Michael
The administrator has disabled public write access. |
